How to avoid plug and socket misplug for same poles pluggable terminal blocks?

With the continuous expansion of functions, the above electronic interface is increasing. It is common that same products, or even terminal blocks of the same poles are used on the same device, and there is no way to avoid misplug during on-site wiring. Here is 5 anti-misplug methods: 1. different colors; 2. add printing on the products; 3. add anti-misplug accessory; 4. add the orientation structure in different locations; 5. add empty poles or distinguished from poles.

What are the mechanical performance test items of terminal blocks?

Mechanical performance test items of terminal blocks include: Torque test, Secureness test, Tensile test, Insertion and pullout force test.

What are the charging connector design specifications?

Charging connector design specifications: A. Type 2 connector: IEC 62196-1, IEC 62196-2, IEC 62196-3; B. Type 1 connector: SAE J1772; C. GB connector standards.

What are the common electro-plating methods of terminal blocks?

Common electro-plating methods include: A. Continuous plating — put the plating strips into the plating tanks already planned, for parts easily deformed during electro-plating, continuous plating first then forming; B. Barrel plating — put bulk plating parts into the drum then into the plating tank; C. Hanging plating — put the parts on the rack then into the plating tank.

What are the factors that lead to aging of terminal blocks housing?

Factors include: Environment and temperature — too high temperature leads to insulated breakdown; Chemical corrosion — long-term chemical or electrolytic corrosion affects the housing insulation material, reducing insulation; Mechanical stress — repeated insertion and pullout can cause wear on contacts and housing.

What are the minimum acceptable spacings for terminal blocks per UL 1059?

Terminal Blocks Minimum acceptable spacings for UL 1059 vary by application and voltage. Specific requirements include minimum spacings between uninsulated live parts of opposite polarity, and between an uninsulated live part and a grounded part, measured through air and over surface.

What is the tightening torque for screws in terminal blocks?

Tightening torque for screws varies by screw size and terminal block model. Refer to the specific product datasheet for the recommended torque values.

Technical FAQs

Question category

Popular

Title	Question category	Product category
Tightening torque for screws	Mechanical performance	Terminal blocks
Secureness test	Mechanical performance	Terminal blocks

1 2 3 4 5 6 6/6 GO

Product

Terminal Blocks
DIN-Rail TB
Circular Connector
HDC
Electronic Products
Electric Vehicle Charger
EBIKE Connector
Energy Storage Connector
Power Supplies
DPS1 Single Phase Power Supplies
DPS3 Three Phase Power Supplies
PV Connector
Solution

Industrial Automation

Electric Energy

Wind Power Generation

Rail Traffic

Intelligent Building

New energy vehicles

Photovoltaic and energy storage
Service

Customization
R & D Technical
Certified Laboratory
Downloads
FAQ
Product Compliance
About us

About us
Contact Us
Events Information
Company News
My DEGSON

Products Viewed

My download

Products comparison

User Infomation

Online consultation

Online consultation

Leave your needs and let us contact you!

Trade Compliance Legal Notices Data Protection Terms And Conditions

Popular

Technical FAQs